The silicone sealant in the house is moldy and black, the cleaning aunt taught me 2 methods, easy and clean.

When the family decoration, the decoration company will use a lot of glass glue to beautify the local space, such as the kitchen home, the sink, the bottom of the toilet, the sink, the window space and other positions, you can see the figure of the glass glue, it really can make the decoration effect more perfect.

But the glass glue coated place doesn’t look any different at first, but with the increase of time, the original glass glue coated place will slowly change color, until it finally turns black.

In fact, this is all caused by the glass glue mold, and disgusting mold will continue to appear.

We all know that once the glass glue becomes moldy and black, it will greatly affect the decorative effect in the home, but what we don’t know is that it will actually breed bacteria, and eventually even endanger the life of the glass! family health! Because mold is not only disgusting, it also releases “biochemical toxins.”

And large and small mold circles, in addition to “visual pollution”, mold brings “harm” not only these, the mold will not only emit bad taste, but also with the release of mycotoxins and spores (seeds).

And, in our home, there is one of the most common household appliances which is also the most likely to produce mold, also ignored by us, we have carefully watched friends who will find this appliance is the refrigerator!

The reason why the refrigerator rubber strip is moldy is because of the smell of food threads in the refrigerator, in addition to the accumulation of bacteria caused by the refrigerator for a long time. Once the rubber strip is moldy and black, there are too many bacteria and mold accumulated on it.

The reproduction of mold depends on spores, although the spores do not reproduce at -10 degrees Celsius, but its vitality is very strong, it can resist the low temperature of -50 degrees Celsius, once the temperature rises it can return vitality to life. Under a microscope, you can see a fungus called Alternaria on the refrigerator door, a type of mold that can cause an inhalation allergy.

In addition, there are penicillium, Aspergillus flavus, Aspergillus fumigatus and other molds, mold is also carcinogenic, hot water is hot!

In addition to the refrigerator door sealing strip will produce mold, the refrigerator may also contain a large number of pathogenic bacteria, such as Salmonella, Escherichia coli, listeria, these invisible bacteria, once the human body eats, the light causes abdominal pain, diarrhea, meningitis, sepsis, endocarditis and other diseases.

After meeting them, I immediately use boiling water to heat it up, but a look to give up, it’s no use.

For this kind of stubborn mold, ordinary methods can not solve, just like glass glue mold, many people directly think with steel ball cloth, but it is always difficult to clean it while, although this can solve some situation not very serious, but will let the glass glue leave some fine scratches,

This affects the appearance level of the entire space, and over time, the glass glue will continue to breed black moldy bacteria.

So repeatedly, these stubborn home health problems are not solved, I think everyone who has struggled with this problem has a lot of headache.

So can we find an easier way? Of course, the answer is yes, because I also hired a cleaning aunt two days ago, she used two good methods for my glass glue and moldy place in my house, just a few minutes of easy moldy, and the process is very simple. , but finally she charged me a lot of money, which makes me feel particularly painful.

In order not to spend more money on this aspect, when cleaning the aunt glass glue mold, I looked carefully at a few, these two are really a good method, and can be purchased on the market, very affordable, the operation is very simple, not to say a lot, directly give dry goods, then share with you.

The first step, white vinegar

White vinegar has good sterilization effect, because the mold area is small, we can use a toothbrush to clean, which is divided into three steps:

First clean with water again, with a toothbrush as far as possible to soak up the mold.

A mixture of white vinegar and water is used for details until no stains remain.

Wait 5 minutes, and then the final stage of water cleaning, clean, but also timely sterilization treatment.

However, this method has a limitation, it is only suitable for a small range of fungi, if it is a g

0 replies

Leave a Reply

Leave a Reply

Your email address will not be published.